My weekend of music, mayhem, and murder

Just like the title says, I had a great weekend filled with music, mayhem, and murder. It started out with me shooing the In Repose concert down at the Tiger bar in northwest Portland on Saturday night. Great show! If you missed them you can catch them playing at the Ash St. Saloon on April 2^nd. Head on down and see a great live show.

On Sunday it was pretty much a day shoot for the band Sweet Teen Killing Machine. The band is

Scott Chapin - Vocals, Guitar, Bass, Keys Paul Becker - Guitar Cheo Larcombe - Drums Kevin Ellis – Keyboards. Sweet Teen Killing Machine is a recording project dedicated to rock and horror 

I am making a short film, of sorts, to play behind the band at their music video release on Saturday, March 19 · 8:00pm – 11:00pm at The Globe, 2045 Southeast Belmont Street

Release of their new cd and the premiere of the video "City of the Shrieking Dead" Video Premieres @ 9pm accompanied by a "making of"montage and @ 9:30 is the debut performance of Sweet Teen Killing Machine

So, where does one shoot a mini horror movie in Lake Oswego? Why, in the creepiest crawl space I have ever lived above, of course. Our condo is built on the side of a hill, (a volcano, technically) and the crawl space under it goes from about ten feet deep to close to twenty. Just a little bit of light fights its way in through the foundation vents, but that is no where near enough to see by.

Paul from STKM comes by the house, as does Brett from In Repose. Brett makes a fabulous villain on the screen, so I asked him to come over and play crazy man. We were initially going to head out into some wooded areas nearby to get some chase footage first, but just before Brett arrived a huge rain storm hit with super wind and we lost power.

With that much rain it didn't make sense to shoot outdoors. We decided to try and wait it out. Power-less, we headed down into the freaky crawl space to get the horror footage first. What could possible go wrong? There was water streaming into the area from the storm, and lots of cobwebs, but it went great. We had to create enough light to get my cameras to focus in the dark, so thanks to a few Lazer-Brite lights, we got some crazy stuff.

After a healthy dose of Flying Pie Pizza, the power returned and the rain settled. We headed outside to get the last part of the chase scenes, and shot into the night. Now comes the fun part: editing it all down into a twenty plus minute nail biter.

I love my job!

My weekend of music, mayhem, and murder

Just like the title says, I had a great weekend filled with music, mayhem, and murder. It started out with me shooing the In Repose concert down at the Tiger bar in northwest Portland on Saturday night. Great show! If you missed them you can catch them playing at the Ash St. Saloon on April 2^nd. Head on down and see a great live show.

On Sunday it was pretty much a day shoot for the band Sweet Teen Killing Machine. The band is

Scott Chapin - Vocals, Guitar, Bass, Keys Paul Becker - Guitar Cheo Larcombe - Drums Kevin Ellis – Keyboards. Sweet Teen Killing Machine is a recording project dedicated to rock and horror 

I am making a short film, of sorts, to play behind the band at their music video release on Saturday, March 19 · 8:00pm – 11:00pm at The Globe, 2045 Southeast Belmont Street

Release of their new cd and the premiere of the video "City of the Shrieking Dead" Video Premieres @ 9pm accompanied by a "making of"montage and @ 9:30 is the debut performance of Sweet Teen Killing Machine

So, where does one shoot a mini horror movie in Lake Oswego? Why, in the creepiest crawl space I have ever lived above, of course. Our condo is built on the side of a hill, (a volcano, technically) and the crawl space under it goes from about ten feet deep to close to twenty. Just a little bit of light fights its way in through the foundation vents, but that is no where near enough to see by.

Paul from STKM comes by the house, as does Brett from In Repose. Brett makes a fabulous villain on the screen, so I asked him to come over and play crazy man. We were initially going to head out into some wooded areas nearby to get some chase footage first, but just before Brett arrived a huge rain storm hit with super wind and we lost power.

With that much rain it didn't make sense to shoot outdoors. We decided to try and wait it out. Power-less, we headed down into the freaky crawl space to get the horror footage first. What could possible go wrong? There was water streaming into the area from the storm, and lots of cobwebs, but it went great. We had to create enough light to get my cameras to focus in the dark, so thanks to a few Lazer-Brite lights, we got some crazy stuff.

After a healthy dose of Flying Pie Pizza, the power returned and the rain settled. We headed outside to get the last part of the chase scenes, and shot into the night. Now comes the fun part: editing it all down into a twenty plus minute nail biter.

I love my job!

Flora continuous lighting system

The Flora continuous light system is the newest lighting kit from Linco Inc. It offers 2040 watts of 5500k daylight balanced power from a single unit, and can be easily used for both video and still capture.

The Flora has a convenient compact size head that is made of flame retardant nylon. Its off set tilt mound helps keep the over all size of the unit small, and with the large handle on the back of the unit you will have no problems making adjustments.

The light is very simple to set up, with the only time consuming part being screwing in the 6 large 85 watt compact florescent bulbs into the head after installing the soft box. The hexagon shaped soft box is incredibly easy to set up and install. It is built much like an umbrella where all you have to do is pull back on the rear cord and the box opens up and locks into place. Then place it onto the Flora head, tighten down the holding screw, and you are set. There is also an internal mount for an umbrella to add more versatility to the system.

On the back of the Flora you will find two power switches. Each of the switches controls three of the lights so you can cut your power output by half if needed through an on/off/on combination.

The only downside to this unit is the bulbs and transporting them. I ended up keeping the original shipping boxes and using them to pack up and transport the bulbs to the studio, and then to another location. It would be fantastic to have a bulb carrier to go along with these lights with some kind of foam in bag. I don't think that it would be to difficult to put something together, either, if you find yourself needing to travel with them more frequently. If you're going to be keeping them in a studio the majority of the time, then this will not be an issue at all.

As I mentioned before, these lights are also very good for video work. We took them over to a commercial shoot and used one of the Flora units for lighting an interior. Another option to help dial in your light is to remove some of the bulbs if they are giving too much light output. All in all, there are many lighting options from these units.

One thing I must point out is the stands that came with these lights. The 8308 compact light stand retails for $39.99 from Linco and they are one of the best stands I have ever used. They have a tight foot print when collapsed down, and can extend up to 8'. They have a holding weight of 19.8lbs., and weigh only 4.4lbs each. These stands are are tough and take up less space in your bag than many others.

The Flora lights themselves have the versatility to take care of your lighting needs especially when using modern hybrid cameras that are used for both still and motion capture. I think that these lights will find a very comfortable place living in studio. I might not take these lights out to locations on a regular basis, but these would be my first go to system for all of my video work with out a doubt. I recommend them to anyone who is looking for a light system for both still and motion capture.

Flora continuous lighting system

The Flora continuous light system is the newest lighting kit from Linco Inc. It offers 2040 watts of 5500k daylight balanced power from a single unit, and can be easily used for both video and still capture.

The Flora has a convenient compact size head that is made of flame retardant nylon. Its off set tilt mound helps keep the over all size of the unit small, and with the large handle on the back of the unit you will have no problems making adjustments.

The light is very simple to set up, with the only time consuming part being screwing in the 6 large 85 watt compact florescent bulbs into the head after installing the soft box. The hexagon shaped soft box is incredibly easy to set up and install. It is built much like an umbrella where all you have to do is pull back on the rear cord and the box opens up and locks into place. Then place it onto the Flora head, tighten down the holding screw, and you are set. There is also an internal mount for an umbrella to add more versatility to the system.

On the back of the Flora you will find two power switches. Each of the switches controls three of the lights so you can cut your power output by half if needed through an on/off/on combination.

The only downside to this unit is the bulbs and transporting them. I ended up keeping the original shipping boxes and using them to pack up and transport the bulbs to the studio, and then to another location. It would be fantastic to have a bulb carrier to go along with these lights with some kind of foam in bag. I don't think that it would be to difficult to put something together, either, if you find yourself needing to travel with them more frequently. If you're going to be keeping them in a studio the majority of the time, then this will not be an issue at all.

As I mentioned before, these lights are also very good for video work. We took them over to a commercial shoot and used one of the Flora units for lighting an interior. Another option to help dial in your light is to remove some of the bulbs if they are giving too much light output. All in all, there are many lighting options from these units.

One thing I must point out is the stands that came with these lights. The 8308 compact light stand retails for $39.99 from Linco and they are one of the best stands I have ever used. They have a tight foot print when collapsed down, and can extend up to 8'. They have a holding weight of 19.8lbs., and weigh only 4.4lbs each. These stands are are tough and take up less space in your bag than many others.

The Flora lights themselves have the versatility to take care of your lighting needs especially when using modern hybrid cameras that are used for both still and motion capture. I think that these lights will find a very comfortable place living in studio. I might not take these lights out to locations on a regular basis, but these would be my first go to system for all of my video work with out a doubt. I recommend them to anyone who is looking for a light system for both still and motion capture.

Trigmaster Plus from Aputure

A couple of weeks ago I was fortunate enough to receive a few of the Trigmaster plus transceivers from Aputure for review.

These units ship with 2 AAA batteries, Remote cable to hook to your camera for remote shutter control, PC cable, Sync cable, and Sync output converter. They retail for about $60.00 and, needless to say, you are covered for most of your uses right out of the box.

The Trigmaster Plus transceivers have a nice feel to them. They do not feel cheap and easily breakable in your hand. They operate on 2.4G instead of 433Hz like previous models. The button layout is simple and logical. You have a function switch to go from transmitter to receiver, illuminated channel selection via the small channel button to the right of the channel display, and a large trigger button. The power switch is located on the user's right side next to a very beefy antenna. On the other side of the transceiver are three ports: Studio flash sync, camera remote shutter port, and a PC in port.

The units have a sync speed of 1/250^th of a second and a range of about 260 feet. They have plastic feet without a locking ring. At first I thought that this was going to be an issue. I do like metal feet, but these have a set of tabs on the side of the feet that do a great job of keeping them in place. There is also a hole for accommodating a locking pin from my Nikon flashes.

These transceivers can also be used for shutter control. There are two ways to do this: the first is to use the remote cable and connect it to a transceiver, turn the mode switch to tx, and you're set. The second is to use a second transceiver mounted on the top of the camera and connect with the same remote cable. When you have the triggers set for remote triggering you can use the continuous shooting mode. Just hold the trigger button down for 3 seconds and when you release the button the camera will continue to fire at a fairly fast pace. Touch the trigger button a second time and the continuous shooting is canceled. I find this a fun function for both sports and children.

The only issue I have had with the layout of the Trigmaster Plus units is the test button. The main trigger button on the unit is used for remote shutter firing, and not as a test button for your flash. Instead you have to hold the trigger button down half way and then press the channel button. That is how you test fire your flash units. It is not an impossible task, but is does get a little cumbersome when you are holding a flash meter in one hand and trying to test fire your strobes. Overall, if that is the only issue for the Trigmaster Plus units then they are doing well.

All in all, the Trigmaster Plus transceivers are a great transceiver, easy to use, very reliable, small, and use common AAA batteries. All of that along with a small size makes them a great buy. If you are in the market for triggers I highly recremend taking a good long look at the Trigmaster plus transceivers from Aputure.

Trigmaster Plus from Aputure

A couple of weeks ago I was fortunate enough to receive a few of the Trigmaster plus transceivers from Aputure for review.

These units ship with 2 AAA batteries, Remote cable to hook to your camera for remote shutter control, PC cable, Sync cable, and Sync output converter. They retail for about $60.00 and, needless to say, you are covered for most of your uses right out of the box.

The Trigmaster Plus transceivers have a nice feel to them. They do not feel cheap and easily breakable in your hand. They operate on 2.4G instead of 433Hz like previous models. The button layout is simple and logical. You have a function switch to go from transmitter to receiver, illuminated channel selection via the small channel button to the right of the channel display, and a large trigger button. The power switch is located on the user's right side next to a very beefy antenna. On the other side of the transceiver are three ports: Studio flash sync, camera remote shutter port, and a PC in port.

The units have a sync speed of 1/250^th of a second and a range of about 260 feet. They have plastic feet without a locking ring. At first I thought that this was going to be an issue. I do like metal feet, but these have a set of tabs on the side of the feet that do a great job of keeping them in place. There is also a hole for accommodating a locking pin from my Nikon flashes.

These transceivers can also be used for shutter control. There are two ways to do this: the first is to use the remote cable and connect it to a transceiver, turn the mode switch to tx, and you're set. The second is to use a second transceiver mounted on the top of the camera and connect with the same remote cable. When you have the triggers set for remote triggering you can use the continuous shooting mode. Just hold the trigger button down for 3 seconds and when you release the button the camera will continue to fire at a fairly fast pace. Touch the trigger button a second time and the continuous shooting is canceled. I find this a fun function for both sports and children.

The only issue I have had with the layout of the Trigmaster Plus units is the test button. The main trigger button on the unit is used for remote shutter firing, and not as a test button for your flash. Instead you have to hold the trigger button down half way and then press the channel button. That is how you test fire your flash units. It is not an impossible task, but is does get a little cumbersome when you are holding a flash meter in one hand and trying to test fire your strobes. Overall, if that is the only issue for the Trigmaster Plus units then they are doing well.

All in all, the Trigmaster Plus transceivers are a great transceiver, easy to use, very reliable, small, and use common AAA batteries. All of that along with a small size makes them a great buy. If you are in the market for triggers I highly recremend taking a good long look at the Trigmaster plus transceivers from Aputure.